Prop injection sites

In addition to water quality issues, fracking wells release compounds into the air, such as benzene, ethylbenzene, toluene and n-hexane; long-term exposure to these has been linked to birth defects, neurological problems, blood disorders and cancer. The National Institute for Occupational Safety and Health (NIOSH) has found that workers may be exposed to dust with high levels of respirable silica during hydraulic fracturing. These findings were shared after  NIOSH studied  116 full shift air samples at 11 hydraulic fracturing sites in five states.

UNIVERSAL MOTOR MOUNT KIT. Fits all firewalls. No welding jig required. Send us the dimensions relative to the pilots lower right hard point of the firewall hard points, thrust line location and length of the cowl if any to the prop flange. We will send you a kit of parts including one inch diameter, .049 wall, 4130 tubes cut to proper length. End fittings listed separately below and Teflon lined rod ends included. You weld on the end fittings. The exact position of the prop flange and thrust line off set angles if any are adjustable. Cost $500 Less the PSRU adapter plate. Contact Paul.

Prop injection sites

prop injection sites


prop injection sitesprop injection sitesprop injection sitesprop injection sitesprop injection sites